Ez a weboldal cookie-kat (sütiket) alkalmaz a jobb használhatóság és a kellemesebb felhasználói élmény érdekében.
A weboldalunkon történő további böngészéssel hozzájárul a cookie-k használatához. A részletes adatkezelési tájékoztatóért kattintson ide!

Termékek Menü

30D Syringe pumpa

Cikkszám: ISCO 30D Syringe Pump
Gyártó: Teledyne Isco
Elérhetőség: Előrendelhető

Termékfelelős: Bende Zsolt Levente

Mobil: 06-30/311-8358     

E- mail: bende.zsolt@labex.hu

Leírás és Paraméterek

30D Syringe Pump

High Pressure Applications - up to 2,068 bar (30,000 psi)

The 30D High Pressure Syringe Pump takes traditional syringe pumps to the next level of deep well core analysis. Not only does it handle exceptional low-flow stability with ease, but it gives you the ability to reach pressures of 2,068 bar (30,000 psi). It is ideal for high-pressure experiments requiring precision control, such as: rock core analysis for hydrocarbon recovery studies in deep-well reservoirs; reactant feed in chemical process development; and proteomics research using nanobore capillary packed columns. 

Standard Features

  • 30D pump has 1/4" F-250 fittings for secure high-pressure connections 
  • Volume delivery of 0.00001 to 22 ml/min 
  • Refill rate up to 29ml/min 
  • Pressure accuracy 0.2% full scale 
  • Displacement resolution 1.83 nL/step
  • Exclusive "Smart Key" controller. All ISCO D-series pumps use the same controller that can operate any four pump modules, either independently or together. Operating modes include: 
    - Single pump independent constant flow or pressure 
    - Single pump flow - or pressure - ramp programming 
    - Single pump dispensing 
    - Dual pump continuous constant flow or pressure 
    - Dual pump concentration gradients 
    - Four-pump configured systems 
  • RS-232 serial interface, RS-485 2 wire serial interface, USB and Ethernet using TCP/IP for computer control or monitoring of operating parameters. 
  • Redundant safety is designed in. All D-Series pumps have mechanical and electrical fail-safes, in addition to the factory default or user-set limits. 
  • Corrosion resistance. Nitronic 50 - the standard material for cylinders, pistons, and caps - is an austenitic stainless steel with outstanding strength and corrosion resistance. 
  • Standard seals are heavy-duty, graphite-impregnated Teflon, providing very long life under harsh operating conditions. 


  • Rock core analysis for hydrocarbon recovery studies in deep-well reservoirs 
  • High pressure experiments requiring precision control 
  • Proteomics research using nanobore capillary packed columns 

Options and Accessories

  • Drivers for LabVIEW software from National Instruments 
  • A30 - Continuous flow system with electric valves 
  • E30 - Continuous flow system with electric valves 
  • Manual refill and outlet valve kits 
  • 4-20 mA output for monitoring flow rate, pressure, and volume 
  • 4-20 mA input for flow rate and pressure control 
  • Analog voltage output for monitoring flow rate, pressure and volume

​​​​​​30D Syringe Pump


​30.42 mL

​Flow Range

​0.00001 to 22 mL/min

​Flow Accuracy

​± 0.5% above 69 bar and above 0.25 mL/min

​Displacement Resolution

​1.825 nL/step

​Pressure Range

​0.69 to 2,068.44 bar (10 to 30,000 psi) 

​Standard Pressure Accuracy

​0.2% Full Scale (at constant temperature)

Wetted Materials

​Inconel, Nitronic 50, Graphite filled, PTFE, Hastelloy C-276, Inert polymers

​Plumbing Ports

​1/4" Autoclave Engineers, Type F250C

​Operating Temperature

​5 to 40 °C Ambient

​Power Requirements

​100 VAC, 117 VAC, 234 VAC, 50/60 Hz

​Dimensions (H x W x D)

​100 x 27 x 47 cm (39.4 x 10.7 x 18.4")


​Pump - 36.4 kg (80.2 lb)
Controller - 3.0 kg (6.5 lb) 


Kérdése van? Forduljon bizalommal hozzánk!

Termékeinkkel, szolgáltatásainkkal kapcsolatban várjuk megkeresését az alábbi elérhetőségeken: