Ez a weboldal cookie-kat (sütiket) alkalmaz a jobb használhatóság és a kellemesebb felhasználói élmény érdekében.
A weboldalunkon történő további böngészéssel hozzájárul a cookie-k használatához. A részletes adatkezelési tájékoztatóért kattintson ide!

 
 

Flash 10 DAD 800 Detector

Katt rá a felnagyításhoz
Cikkszám: ECOM Flash 10 DAD 800 Detector
Gyártó: ECOM spol. s r.o.
Elérhetőség: Előrendelhető

Leírás és Paraméterek

Flash 10 DAD 800 is an UV-VIS diode array detector (PDA,DAD), which allows measuring absorbance of four wavelengths simultaneously in one cell just as measuring of whole spectrum (scan). More wavelengths are used in liquid chromatography to verify purity of analyzed samples or in situations when some peaks absorb on different wavelengths. It is possible to use the detector in flash and preparative applications.

It is possible to control the detector manually by keyboard and display but also by RS232. At the back panel are available four analog outputs.

The unit’s DAD (diode array detector) design offers many advantages:

  • absorbance measuring on four wavelengths simultaneously
  • wavelength setting from 190 up to 840 nm in increments of 1nm
  • on-line scan of whole spectrum
  • lamp work hours are counted using the built-in counter for both deuterium and halogen lamps
  • the cell is easy to replace from the side of the detector
  • powering by 90–264 V
  • unit is controlled by RS232 and keyboard 
  • signals are available in analog and digital form
  • easy service and diagnostic using display and keyboard
  • adaptation for external cell connection available

Technical parameters:

Wavelength range 190 - 840 nm (256 elements on CCD)
Typical spectral half-width 10 nm
Accuracy of adjustment ± 1 nm
Reproducibility ± 0.5 nm
Light source Deuterium discharge lamp
Noise level at test cell (254 nm, TC 0.75 s) ± 5 x 10-5 AU
Drift at test cell (254 nm after 1 hr) 1 x 10-3 AU/hr
Materials in contact with mobile phase PTFE; fused silica, stainless steel
Time constant (T90) 0.5 s; 0.75 s; 1 s or 2 s (T63 0.3s;0.4s;0.6s;1s)
Digital output for integrator 1 V/AU
Four 1V analog outputs for integrator with sensitivity switching  5; 3; 2; 1; 0.5; 0.25; 0.1; 0.05 AU/V
Interface RS 232
Power supply 90–264 V
Power input 110 VA
Dimensions (W x H x D) 135 x 170 x 418 mm
Weight 6.0 kg

 

Preparative cell PLCC 15 (delivered with unit):

volume/optical path(adjustable) 45 µl / 0.3 mm (basic)
55 µl / 1.4 mm
70 µl / 2.4 mm
connecting tubing with OD = 1/8", thread 1/4"-28
maximal flow rate 500 ml/min. (3000 ml/min. with PLCC 3L)
Partnereink
Segíthetünk?